HG氯化钙干燥设备产品概述 氯化钙粉末加入干燥机后，在筒内均布的抄板器翻动下，氯化钙粉末在干燥机内均匀分布与分散，并与并流（逆流）的热空气充分接触，加快了干燥传热。传质。在干燥过程中，氯化钙粉末在带有倾斜的抄板和热气流的作用下，可调控地运动至于干燥机另一段星型卸料阀排出成品。 适用于化学、矿业、冶金等行业大颗粒，比重大物料干燥，如矿石、高炉矿渣、煤、金属粉末、磷肥硫铵。对有特殊要求的粉状，颗粒状物料的干燥。如：HP发泡剂酒糟渣轻质碳酸钙活性白土磁粉石墨药渣。要求低温干燥且需大批量连续干燥的物料。

HG回转滚筒氯化钙干燥机设备特点 转筒机械化程度高生产能力较大。 流体通过筒体阻力大功率低 对物料特性的适用性比较强 操作稳定操作费用较低 产品均匀性好。

HG回转滚筒氯化钙 干燥机技术参数 形式 直接加热顺流式 直接加热顺流式 直接加热逆流式 直接加热逆流式 复合加热 复合加熱 物料种类 矿石 HP发泡剂 高炉矿渣 硫铵 磷肥 煤 处理量(kg/h) 1000 466 15000 20000 5000 1000 初含水量(%) 30.5-35.5% -15% -4%-10% -2%-6% -20%-30%

终含水量(%) %10-%15 %1-%3 %1.5-%3.5 %0.1-%0.3 %7-%9

平均粒径(mm)

6-8mm

4-7mm

1/16"-3/16"

1/8"-2"

物料堆积重度(kg/M²)

800

1100

800

770

850

600

900

700

720

Heat Air Quantity (kg/h)

39000

5400

10750

9800

Entry Gas Temperature (℃)

165-185°C

420°F

170°C

180°C

70°F

Material Outlet Temperature (℃)

150°C

42° C

120°F

70°F

60° C

75°F

Heating Method:

Gas, steam or electric heating, heavy oil, coal-fired hot air furnace.

Discharge Rate (%)

80%

95%

90%

85%

80%

60%

Speed of Rotation (RPM)

45 RPM

65 RPM

40 RPM

55 RPM

Slope of the Cylinder (%)

12%

22%

25%

18%.

Number of Blades:

12 blades on the inside and outside surfaces.

The drying machine is designed for high-quality drying with a low temperature range and a continuous process to ensure that the material is dried evenly throughout its entire length without any overheating or underheating points in between.

This ensures that all parts of the material are exposed to heat equally which leads to better quality end product.

It can also be used for batch processing where large quantities are not required but more control over each batch is needed.

In addition, it can be used as an intermediate step in larger production processes before packaging or further processing.

The HG series rotary drum dryer is widely used in various industries such as mining, chemical manufacturing, agriculture and food processing due to its versatility and reliability.

Its unique design allows for efficient heat transfer from the hot gases passing through it while maintaining proper humidity levels within the chamber ensuring consistent results every time you use it regardless of what type of materials you're working with whether they're dry powders liquids slurries etcetera…