大型微波干燥设备ZKED-4570，宠儿触摸屏操控，IR温暖抚慰，价格公道。一、设备概述ZKED-4570主要用于TP或点胶后加热流平及UV干燥。二、设备规格以及主要技术指标1.有传送宽度：600mm2.机台结构:传送带上方电热管恒温加热,下方UV灯从下向上照射固化产品.3.机台尺寸:入料段300mm,流平及UV固化段2500mm,出料段300mm.4.温度范围:常温-100℃,常用60℃5.UV固化方式：UV LED灯固化,置于传送带底面向上照射产品.LEDUV灯技术参数 ：1.LED照射头数量:4组，每组发光面积450mm*250mm，450mm为网带宽度方向2.LED灯波长: 365±5nm3初期发光强度: 50～100ｍＷ/cm²可调4照射方向:底面照射与传送带呈90度角摆放5(LED芯片):韩国LG芯片6.product表面温度60℃以下（速度1.0m∕min，不开上加热状态下测量）7有效照射距离10-50mm可调8有效照射幅宽450mmm加热上盖技术参数：1.added heat segment length to 2500 mm2.added heat method with quartz ceramic heating elements and a total of 18 branches at a power of 400W per branch3.temperature range from room temperature to -100°C with a typical usage at 60°C transmission system parameters :1.feeding manner by hand2.stainless steel conveyor belt with mesh size of 100x10 mm and wire diameter of 1.2 mm3.conveyor width is designed for handling products up to a maximum width of 600 mm4.conveyor speed adjustable between the range of one to three meters per minute5.max weight capacity is five kilograms for each fixture including product6.the motor used is an AC motor with variable speed control7.project material includes internal and external surfaces made from SS41# steel plates that have undergone rust protection treatment followed by electrostatic powder coating in light gray color #60.The control system consists of PLC touch screen operation without MES interface but equipped with energy-saving mode where the UV lamps are automatically turned on when materials enter the feeding area and shut off after a set time delay for energy conservation.Human-machine interface can be adjusted for setting automatic start-up time and shutdown time for the machine table.The overall dimensions are approximately800 kg long3100 mm wide1000 mmand high1500 mminus ice water machines and cold air blowers (optional).